Design Overview
Tangential Roller Conveyor has been designed efficiently to the highest level whilst keeping with in the focus of our vision to supply high quality cost effective products. The ability to accumulate product with very low line pressure gives reassurance to the End User to keep damaged products to a minimum. With that said its seamless image and sleek profile will impress all.
Applications
Carton / Tote transportation or accumulation, Food, Beverage & Confectionary Processing, Logistics, Freight & Parcel, Airport & Aviation, Warehousing, Picking Lines, Machine in-feed & out-feed, other.
Dimension Layout
Dimension Specification
CML (Conveyor Module Length) | 3,000mm |
LW (Lane Width) | 317, 417, 517, 617, 717, 817, 917 |
PH (Profile Height) | 165 Standard / 110 Low Side Profile |
SG (Side Guide Height) | 50mm Standard / -5mm Low Side Profile |
RP (Roller Pitch) | 60mm, 75mm, 150mm |
OAW (Over All Width) | Determined by LW |
System Applications
Tangential Roller Conveyor Curve Modules can be utilised in the majority of system layouts when conveyor directional change is required. It has been designed to ensure that if your product enters the curve straight it will exit the curve straight eliminating the need to correct the orientation of the product. Available in four different angles, there is a curve to suit your requirement
Dimension Layout
Dimension Specification
LW (Lane Width) | 317, 417, 517, 617, 717, 817, 917 |
PH (Profile Height) | 165 Standard / 110 Low Side Profile |
SG (Side Guide Height) | 50mm Standard / -5mm Low Side Profile |
RP (Roller Pitch) | 75mm (nom.) |
OAW (Over All Width) | Determined by LW (Calculate as Above) |
DEG (Curve Degree) | 30°, 45°, 60°, 90° |
System Applications
Tangential Roller Conveyor Spur Modules can be utilised in the majority of system layouts when product diversion / merging is required. Wether it be diverting off a DAMON High Speed Sorter or simply merging into a mainline conveyor we have the Spur Conveyor for your needs. We can custom build your spur to accommodate a motor when individual drive is required.
Dimension Layout
Dimension Specification
CML (Conveyor Module Length) | 3,000mm |
LW (Lane Width) | 317, 417, 517, 617, 717, 817, 917 |
PH (Profile Height) | 165 Standard / 110 Low Side Profile |
SG (Side Guide Height) | 50mm Standard / -5mm Low Side Profile |
RP (Roller Pitch) | 60mm, 75mm, 150mm |
OAW (Over All Width) | Determined by LW |
SA (Spur Angle) | 30°, 45°, 60° |
Technical Specifications
General General | |
Conveyor Speed | 9 to 50 (meters per min) |
Max. Load Rating | 250 (kg per meter) |
Operating Temperature | -5 to +50 °C |
Min. T.o.R (Top of Roller Height) | 400mm |
Drive | |
Transmission | 1/2P Simplex Chain & Sprockets |
Transmission Configuration | Tangential Chain to Sprocket |
kW Rating per Zone | 0.37kW |
Rated Voltage | 415V — 3 Phase —5 0 Hz |
Max. Length Zone per Drive | 15 meters |
Roller | |
Roller—Positive Drive | 2214 Series |
Roller—Friction Accumulation | 3214 Series |
Roller Diameter | Ø50mm, Ø60mm |
Roller Tube Material | Mild Steel Galvanised, Stainless Steel Gr.304 or PVC |
Side Profile | |
Standard Profile | 165mm x 44mm Aluminium |
Low Profile (Sits 5mm Below Top of Roller) | 110 x 44mm (Allows Product Diversion) |
Profile Combinations | 165/165, 165/110, 110/165 |